Audi 80/Avant (B4)


Audi 80/Avant
The description
Engines
System of release of the fulfilled gases
Cooling system
Fuel tank and the fuel pump
The air filter and intake channels
Injection system
Coupling
Transmission and transmission
Suspension bracket and steering
Brake system
Antiblocking system of brakes
Wheels and tyres
body electrosystem
Ignition system
Illumination
Signalling devices
- Devices and auxiliary devices
   Check of indicators and signalling devices
   Elements of a combination of devices
   Speedometer
   Tachometre
   Hours
   The indicator of quantity of fuel
   The indicator of temperature of a cooling liquid
   Voltage stabilizer
   Additional devices
   The top indicators in a combination of devices
   The indicator of a cooling liquid
   The indicator of brake system
   The indicator of pressure of oil
   Indicators of indexes of turns
   The bottom indicators
   The indicator of a charge of the storage battery
   The indicator of indexes of turn of the trailer
   The indicator of a pillow of safety
   The indicator of antiblocking system
   The headlight indicator
   The indicator of a lay brake
   Self-examination system
   Switches
   The ignition lock
   Check of switches
   Buzzer of switching-off of illumination and radio
   lighter
   Heating of back glass
   Check of screen wipers and стеклоомывателей
   The screen wiper engine
   The list of malfunctions
   Screen wiper of back glass
   The list of malfunctions
   Replenishment of a tank of a washer of glasses
   System of washing of headlights
   Audiosystem
   The aerial of back glass
   Electric regulation of external rear-view mirrors
   System of locks with the central management
   Electric glass lifts
Heating and ventilation
Body elements
Search of malfunctions
Specifications











Audiosystem

Removal

 PERFORMANCE ORDER

  1. To be convinced available a protective number code – for autoradio with the anticreeping coding.
  2. To disconnect the storage battery.
  3. To insert deblocking bracket (sometimes enters into the complete set with built in autoradio) in four apertures on corners of the forward panel and to pull out autoradio from the central console.
  4. Or to insert four suitable nailing or a wire piece in apertures and them to deblock fixing springs.
  5. To pull out autoradio forward, if necessary in addition cautiously hooking a screw-driver.
  6. To remove wire and aerial sockets.
  7. At installation to watch that the fixing pin of autoradio has behind entered into the eye intended for it in the instrument panel. For this purpose it is necessary to hold autoradio absolutely horizontally.
  8. A few to press radio into an assembly aperture that fixing springs were latched.
  9. To type a number code at models of autoradio with the anticreeping coding according to the maintenance instruction.

 The help: the protective number code will be necessary for entering anew and in case of a detachment of the storage battery, replacement of a safety lock of autoradio or separation of wires of giving of a food for autoradio.

At the left: on an illustration removal of autoradio by means of two deblocking скоб (1 and 2) is shown. Deblocking скобы press on fixing springs (3), disconnecting them, thanks to it it is possible to take out radio from an aperture for embedding.

On the right: to steal up to two fixing screws (2) lobbies speakerов, it is necessary to remove a covering cautiously.

Removal speakerов, located in the instrument panel

In Audi 80 at the upper right and at the left in the instrument panel are dynamics. The removal and installation description is more low resulted.

 PERFORMANCE ORDER

  1. Small screw-driver cautiously to lift a covering dynamics and to remove it.
  2. Itself speaker it is fixed by means of two screws with crosswise шлицем.
  3. At installation to press fixing pins in dredging on the instrument panel.

Back dynamics are located in a covering of doors.

At the left: after the detachment dynamics attached to an underside of a covering of a door (black arrows specify in fastening points), becomes accessible speaker (2). It also is screwed directly on a covering (white arrows show on fixing screws).

On the right: high-frequency speaker (2) it is established separately and fixed by a carving ring (1).

Dynamics in a covering of back doors

If back dynamics have been established at factory they are in a covering of back doors.

 PERFORMANCE ORDER

  1. To remove a covering of doors.
  2. To disconnect speaker on a covering underside.
  3. To weaken three fixing screws dynamics and to disconnect a wire.
  4. High-frequency dynamics: to turn away a carving ring behind on dynamics, to disconnect a wire.